| Mazda MX5 Miata |
Robbins Auto Top Co., Inc. |
| Item No. |
Year |
Description |
Approx. Install
Hours |
Bow Height |
Approx. Weight
(Lbs) |
|
|
|
1990-05 PLASTIC WINDOW TOPS |
|
|
|
| 2900 |
|
1990-97 |
Mazda MX5 Miata Original Style Top with Zippered Plastic Window. Made with original style die cut plastic retainer pieces and wide textured heat-seal around plastic window. Single Ring Pull zipper zips into PC2900Z replacement plastic window for ease of installation. (Top must be partially removed from car to install PC2900Z replacement window). No Rain Rail. |
5.0 |
|
12 |
| 2901 |
|
1990-97 |
Same top as above, with Rain Rail. |
4.25 |
|
(D.W.)*14 |
 |
|
|
|
|
|
|
|
| 2904 |
|
1990-05 |
Mazda MX5 Miata Budget Top with Plastic Window, No Zipper. Non-Original One Piece Design, No Deck Seams. No Rain Rail. NOTE: As of February 15, 2008, 2904 and 2905 tops are manufactured with a Rear Listing. Bowstraps are no longer required to install on 1990-97 Models. |
5.0 |
|
9 |
| 2905 |
|
1990-05 |
Same top as above, with Rain Rail. |
4.25 |
|
(D.W.)*12 |
 |
Original Topping 1990-97 Miata: Black/Black, Light Tan/Black (LTB) German Cabrio Grain Vinyl.
Original Topping 1999-2002 Miata: Black/Black, Light Tan/Black (LTB), Blue/Black (anniversary edition only) German Cabrio Grain Vinyl.
Original Topping 2003-2005 Miata: Black/Black, Parchment/Black German Cabrio Grain Vinyl; Black, Medium Neutral, Dk. Blue, Gray Haartz Stayfast Cloth with Black backing. |
| Important Notes, and Parts & Accessories Below |
|
| 1990-05 GLASS WINDOW TOPS |
| 2958 |
|
1990-05 |
Mazda MX5 Miata Original Style Top with Non-Heated Glass Window, No Zipper. No black bezel around glass. Before installing top on 1990-97 models New Bow Straps (included in box) must be installed on frame. Add 30 minutes to labor time to install new Bow Straps. Die cut plastic retainer pieces. No Rain Rail. |
6.50 |
|
(D.W.)*18 |
|
|
|
|
|
|
|
| 2959 |
|
1990-05 |
Same top as above, with Rain Rail. |
|
|
|
 |
| |
| 2960 |
|
1990-05 |
Mazda MX5 Miata Original Style Top with Heated Glass Window, No Zipper. No black bezel around glass. Before installing top on 1990-97 models New Bow Straps (included in box) must be installed on frame. Add 30 minutes to labor time to install new Bow Straps. Die cut plastic retainer pieces. No zipper, No Rain Rail. |
6.50 |
|
(D.W.)*18 |
|
|
|
|
|
|
|
| 2961 |
|
1990-05 |
Same top as above, with Rain Rail. |
|
|
|
 |
| |
| 2962 |
|
1990-05 |
Mazda MX5 Miata Original Style Top with Heated Glass Window, with Zipper. No black bezel around glass. Single ring pull zipper does not have to be unzipped to lower top. Before installing top on 1990-97 models, New Bow Straps must be installed on on frame (included in box). Add 30 minutes to labor time to install new Bow Straps. Die cut plastic retainer pieces. No Rain Rail. |
6.50 |
|
(D.W.)*18 |
|
|
|
|
|
|
|
| 2963 |
|
1990-05 |
Same top as above, with Rain Rail. |
5.75 |
|
(D.W.)*20 |
 |
| NOTE: 1990-97 models require Three Wire Connector to operate rear defogger. See details below. |
|
|
|
|
|
|
|
| 2964 |
|
1990-05 |
Mazda MX5 Miata Original Style Top with Zipper, Non-Heated Glass Window. (Essentially a 2962 top without defogger). No black bezel around glass. Single Ring Pull Zipper does not have to be unzipped to lower top. Before installing top on 1990-97 models, New Bow Straps must be installed on on frame (included in box). Add 30 minutes to labor time to install new Bow Straps. Die cut plastic retainer pieces. No Rain Rail. |
6.50 |
|
(D.W.)*18 |
|
|
|
|
|
|
|
| 2965 |
|
1990-05 |
Same top as above, with Rain Rail. |
5.75 |
|
(D.W.)*20 |
 |
Original Topping 1990-97 Miata: Black/Black, Light Tan/Black (LTB) German Cabrio Grain Vinyl.
Original Topping 1999-2002 Miata: Black/Black, Light Tan/Black (LTB), Blue/Black (anniversary edition only) German Cabrio Grain Vinyl.
Original Topping 2003-2005 Miata: Black/Black, Parchment/Black German Cabrio Grain Vinyl; Black, Medium Neutral, Dk. Blue, Gray Haartz Stayfast Cloth with Black backing. |
| Important Notes, and Parts & Accessories Below |
|
| 1990-05 UPDATED GLASS WINDOW TOPS |
| 2916 |
|
1990-05 |
Mazda MX5 Miata Non-Original Top with Heated Glass Window, No Zipper. One Piece Design, No Deck Seams. No black bezel around glass. Before installing top on 1990-97 models, New Bow Straps must be installed on top frame (included in box). Add 30 minutes to labor time to install new Bow Straps. Die cut plastic retainer pieces. No Rain Rail. |
6.50 |
|
(D.W.)* 18 |
| 2917 |
|
1990-05 |
Same top as above, with Rain Rail. |
5.75 |
|
(D.W.)* 18 |
| NOTE: 1990-97 models require Three Wire Connector to operate rear defogger. See details below. |
 |
|
| 2918 |
|
1990-05 |
Mazda MX5 Miata Top, with Non-Heated Glass Window. One Piece Design, No Deck Seams, No Zipper. (Essentially a 2916 top without defogger). No black bezel around glass. Before installing top on 1990-97 models, New Bow Straps must be installed on top frame (included in box). Add 30 minutes to labor time to install new Bow Straps. Die cut plastic retainer pieces. No Rain Rail. |
6.50 |
|
(D.W.)* 18 |
| 2919 |
|
1990-05 |
Same top as above, with Rain Rail. |
5.75 |
|
(D.W.)* 18 |
 |
|
Original Topping 1990-97 Miata: Black/Black, Light Tan/Black (LTB) German Cabrio Grain Vinyl.
Original Topping 1999-2002 Miata: Black/Black, Light Tan/Black (LTB), Blue/Black (anniversary edition only) German Cabrio Grain Vinyl.
Original Topping 2003-2005 Miata: Black/Black, Parchment/Black German Cabrio Grain Vinyl; Black, Medium Neutral, Dk. Blue, Gray Haartz Stayfast Cloth with Black backing. |
|
|
|
|
|
|
|
| Important Notes, and Parts & Accessories Below |
|
| MAZDA MX5 MIATA, IMPORTANT INFORMATION |
| IMPORTANT B-Pillar Retainer information applies to all 1990-2005 MX5 Miata tops |
 |
| WARNING, 1990-97 Miatas: If 1990-97 Miata is not equipped with a switch to activate heater/defogger, the heater grid is automatically activated when the fan switch is turned on. To avoid damage to top or area behind seats DO NOT turn on Fan, Heater, or Air Conditioner when top is lowered. |
|
|
|
|
|
|
|
1990-97 MX5 Miata Three Wire Connector. To install our 2960/2961, 2962/2963 or 2916/2917 tops with Heater/Defroster glass on *1990-97 models requires purchasing Mazda OE three wire connector Part # N007-67-060A. This three wire connector is available at Mazda dealers in the U.S. for approximately $135.00.
*1990 models are not wired for defroster. Any attempt to wire these vehicles for rear defrost should be performed by an automotive wiring professional. Many 1991-95 models are not equipped with a separate switch to operate the defroster. Use caution as these operate when the fan switch is turned to any ON position. |
|
|
|
|
|
|
|
Original Topping 1990-97 Miata: Black/Black, Light Tan/Black (LTB) German Cabrio Grain Vinyl.
Original Topping 1999-2002 Miata: Black/Black, Light Tan/Black (LTB) German Cabrio Grain Vinyl.
Original Topping 2003-2005 Miata: Black/Black, Parchment/Black German
Cabrio Grain Vinyl; Black, Medium Neutral, Dk. Blue, Gray Haartz
Stayfast Cloth with Black backing. |
|
| MAZDA MX5 MIATA REPLACEMENT PARTS & ACCESSORIES |
| 2989Z |
|
1990-97 |
Mazda MX5 Miata Replacement Front Top for 2900, 2901 tops. |
5.0 |
|
|
| PC2900 |
|
1990-97 |
Mazda Miata Replacement Plastic Window for FACTORY TOP.
Note: Complete zipper is separate in box. Half of zipper must be sewn to zipper flap in the top, and the other half to the window curtain. |
6.0 |
|
|
| PC2900Z |
|
1990-97 |
Mazda MX5 Miata Replacement Plastic Window for ROBBINS 2900, 2901 TOPS.
Note: Rear of top must be released from top frame for installation. No sewing required. |
3.2 |
|
|
|
| RAIN RAIL |
|
1990-05 |
Rain Rail for Mazda MX5 Miata top. |
|
|
|
| CABLES-2900 |
|
1990-97 |
Mazda MX5 Miata Side Tension Cables (Pair).
Note: For 1999-05 models use CABLES 2960. |
|
|
|
| 1900H |
|
1990-97 |
Mazda MX5 Miata Tonneau Cover for Plastic Window Tops. Headrest Pockets, and Side Zippers. |
1.0 |
|
|
| 1902H |
|
1990-97 |
Mazda Miata Tonneau Cover for Glass Window Tops. Headrest Pockets and Side Zippers. Designed for Robbins Glass Window Tops (Cannot guarantee fit on vehicles with Non-Robbins tops). |
1.0 |
|
|
| B1900 |
|
1990-97 |
Miata MX5 Boot for Plastic Window Top. |
N/A |
|
|
| B1902 |
|
1990-97 |
Miata MX5 Boot for Glass Window Top. |
N/A |
|
|
|
| RAIN RAIL |
|
1990-05 |
Rain Rail for Mazda MX5 Miata top. |
|
|
|
| CABLES-2960 |
|
1999-05 |
Mazda MX5 Miata Side Tension Cables (Pair).
Note:
For 1990-97 models use CABLES 2900. |
|
|
|
| 1904H |
|
1999-00 |
Miata MX5 Tonneau Cover with Headrest Pockets ans Side Zippers. |
1.0 |
|
|
| 1905H |
|
2001-03 |
Miata MX5 Tonneau Cover with Headrest Pockets and Side Zippers.
NOTE: 1905H will not fit with wind blocker with integrated speakers, introduced for 2004. It will fit vehicles NOT equipped with a wind blocker through 2005. |
1.0 |
|
|
| B1904 |
|
1999-05 |
Miata MX5 Top Boot. |
N/A |
|
|
|
| 2006-ON MIATA MX5 |
| 2968 |
|
2006-ON |
Mazda MX5 Miata Top with Heated Glass Window. Original Style OnePiece Design with Listing Panel, No Deck Seams and No Zipper.  Improved Rainguards sewn along sides of top (above door glass). Rain Rail not available, Must reuse original rain rail. |
6.50 |
|
(D.W.)* 18 |
 |
Original Topping 2006-On MX5 Miata: Black/Black, Parchment/Black German
Cabrio grain vinyl;
Black, Brick (2944) Haartz Stayfast cloth with Black backing. |
|
|
| Mazda RX7 |
Robbins Auto Top Co., Inc. |
| Item No. |
Year |
Description |
Approx. Install
Hours |
Bow Height |
Approx. Weight
(Lbs) |
| 2930 |
  |
1988 |
Mazda RX7 Complete Top and Rear Window Assembly, No Rainguards.
Fits to factory rear glass. Must reuse original rear metal retainer. Headliner not supplied. |
6.0 |
|
9 |
| 2931 |
|
1989-92 |
Mazda RX7 Complete Top and Rear Window Assembly, with Rainguards.
Fits to factory rear glass. Must reuse original rear metal retainer. Headliner not supplied. |
6.0 |
|
9 |
| 2940 |
|
1988 |
Front hatch cover only, without Rainguards, as original for 1988. |
2.0 |
|
3 |
| 2941 |
|
1989-92 |
Front hatch cover only, with Rainguards. 2941 will retrofit to 1988 RX7. |
2.0 |
|
3 |
| 2950 |
|
1988-92 |
Rear convertible assembly. Fits to factory rear glass. Glass not offered. Made with original style drain hoses and plastic reinforcement at bottom. Must reuse original rear metal retainer. |
4.0 |
|
7 |
| Original Topping for 2930, 2931, 2940, 2941 and 2950: Black/Black Diamond Grain German Vinyl. (Our KV GrainVinyl is a close match to the original topping). |
|
|
|
|
| (D.W.)* Dimensional Weight (greater than shown) may apply. Actual Weight (lbs.) is shown. |
| REV102109 |
